一 般 介 绍：采用环氧树脂和聚脂树脂为主要原材料制备而成，同时具备两者各自的独特性能，使得生
产出的涂料膜具有极佳的装饰性、机械性能和较强的耐腐蚀性，广泛应用于各种室内金属制品的涂装。 
产 品 系 列：可提供标准型和低温固化型粉末涂料产品。可做成高光（80%以上）、半光（50-80%）、平光（20-50%）无光（20%以下）的产品（可根据 用户的需求控制光泽）。 无缝钢管 
粉末物理性能：比重(g/cm3、25℃ )：1.4-1.7粒度分布：100%小于100微米（可根据涂装的特殊要求进行调整）。

固 化 条 件： 标准型         180℃   （工作温度），15分钟
                     低温固化       160℃    （工作温度），15分
平均覆盖率：  9-12平方米/公斤，膜厚60微米（以100%的粉末涂料使用率计算）。

Epoxy /polyester powder coatings（环氧/聚酯混合型粉末涂料）
General introduction
This type of powder coating is prepared from the epoxy and polyester resin . It has the merits of the two coatings, which makes the filmspreapared from this type of coating more decorative and gives it good mechanical properties and anti-corrosive properly . It is widely applied in the coating for indoor metallic appliances.
Product Series
Standard and low temperature solidification type powder coating can be provided. Products of different gloss are available , namely, high gloss (above 80%), semi gloss(50-80%), flat gloss(20-50%) and no gloss(below 20%). (The gloss can be adjusted according to the customers’ to the demand.)
Physical properties of the powder 
Density(g/cm3,25℃):1.4-1.7
Granularity distribution:100%below 100μm(it can be adapted to the customers’ demand)
Curing Condition
Standard type 180℃(workpiece temperature), 15minutes low temp curing type 160℃(workpiece temperature), 15minutes
Average coating rate
9-12㎡/kg, film thickness:60μm (calculated according to 100% consuming of powder coating)
Coating performance