一 般 介 绍： 采用羧基聚脂树脂制成的粉末涂料，具有优异的流平性、耐化学性、耐侯性和很强的耐油性。适用于汽车、摩托车、加油机和农业机械等对耐化学性、耐油性要求较高的金属外表的涂装.
产 品 系 列：做成高光（80%以上）、半光（50-80%）、平光（20-50%）和无光（20%以下）的产品（可根据用户的需求控制光泽）。
粉末物理性能：比重（g/cm3、25℃）:1.4-1.7粒度分布：100%小于100微米（可根据涂装的特殊要求进行调整)。

固 化 条 件： 200℃（工作温度），10分钟
平均覆盖率：  9-12平方米/公斤，膜厚60微米（以100%的粉末涂料使用率计算）

涂膜性能

Polyurethane powder coatings（聚氨酯型粉末涂料）
General introduction
This type of powder coating is prepared from polyurethane resin . It has excellent leveling property and good resistance to chemicals, elements and oil. It can be applied in the coating on hard conditions, such as the coating for automobiles, motors, oiling machines and agricultural implements and machinery,
Product Series
Products of different gloss are available, high gloss (above 80%), semi gloss(50-80%), flat gloss(20-50%) and no gloss(below 20%). (The gloss can be adjusted according to the customers’ to the demand.)
Physical properties of the powder 
Density(g/cm3,25℃):1.4-1.7
Granularity distribution:100%below 100μm(it can be adapted to the customers’ demand)
Curing Condition
 200℃(workpiece temperature), 10minutes 
Average coating rate
9-12㎡/kg, film thickness:60μm (calculated according to 100% consuming of powder coating)
Coating performance