一 般 介 绍： 可提供混合型、纯聚酯型等多种树脂类型的金属效果粉末涂料，分别适合于用户内或户外使用。本产品具有独特豪华的外观装饰效果，广泛应用于各种高档金属制品、户外家具、IT行业的涂装。
产 品 系 列：可提供高光（80%）、半光（50-80%），平光（20-50%）和无光（20%以下）的产品。也根据用户的需求控制光泽。
粉末物理性能：比重（g/cm3、25℃）:1.4-1.7粒度分布：100%小于100微米（可根据涂装的特殊要求进行调整）
固化条件：200℃（工作温度），10分钟
平均覆盖率：9-12平方米/公斤，膜厚60微米（以100%的粉末涂料使用率计算）
涂膜性能：

Metallic effect powder coatings（金属型粉末涂料）
General introduction
Hybrid and polyster type of such kind of powder coating are available. They are suitable for indoor use and outdoor use respectively. This type of powder coating has special decorative effect of luxury appearance, and it can be widely employed in the coating for various top-grade metallic appliances.
Product Series
Products of different gloss are available, high gloss (above 80%), semi gloss (50-80%), flat gloss(20-50%) and no gloss(below 20%). (The gloss can be adjusted according to the customers’ to the demand..
Physical properties of the powder 
Density(g/cm3,25℃):1.4-1.7
Granularity distribution:100%below 100μm(it can be adapted to the specific demand of coating)
Curing Condition
 200℃(workpiece temperature), 10minutes 
Average coating rate
9-12㎡/kg, film thickness:60μm (calculated according to 100% consuming of powder coating)

Coating performance