美术型粉末涂料
一 般 介 绍:可提供混合型、纯聚酯型等多种树脂类型的美术花纹效果粉末涂料,分别适合于户内或户外使用。本产品具有独特豪华的外观装饰效果,能帮助掩盖基材本身的缺陷。广泛应用于各高档金属制品的涂装。产 品···
13901502010 在线咨询一 般 介 绍:可提供混合型、纯聚酯型等多种树脂类型的美术花纹效果粉末涂料,分别适合于户内或户外使用。本产品具有独特豪华的外观装饰效果,能帮助掩盖基材本身的缺陷。广泛应用于各高档金属制品的涂装。产 品···
13901502010 在线咨询一 般 介 绍:可提供混合型、纯聚酯型等多种树脂类型的美术花纹效果粉末涂料,分别适合于户内或户外使用。本产品具有独特豪华的外观装饰效果,能帮助掩盖基材本身的缺陷。广泛应用于各高档金属制品的涂装。
产 品 系 列:可提供砂纹、锤纹、丝绸纹、大理石纹、金属外观等多种效果的产品。可根据用户的需求提供多种光泽的产品。
粉末物理性能:比重(g/cm3、25℃):1.2-1.8粒度分布:100%小于100微米(可根据涂装的特殊要求进行调整)
固 化 条 件:根据产品的树脂类型而定,具体请参观产品的随附说明。
平均覆盖率:7-10平方米/公斤,膜厚80微米(以100%的粉末涂料使用率计算)
涂腊性能:
检测项目 | 检验标准或方法 | 检验指标 |
抗冲击性 | GB/T 1732-1993 | 30-50kg.cm |
杯突实验 | GB 9753-1988 | 6mm |
附着力(划格法) | GB/T 9286-1998 | 0级 |
弯曲 | GB 6742-1986 | 3mm |
铅笔硬度 | GB/T 6739-1996 | 1H-2H |
盐雾实验 | GB 1771-1991 | >500小时 |
湿热实验 | GB 1740-1989 | >1000小时 |
1.以上实验采用0.8毫米厚经标准前处理的冷轧钢板,涂膜厚度为60-80微米。 | ||
2.以上涂膜的性能指标可能会随着美术效果和树脂类型的不同而有所变化。 |
Artistic powder coatings(美术型粉末涂料)
General introduction
Artistically veined powder coating of mixed type, polyester type and other types are available. They are suitable for indoor and outdoor use respectively. Artistic powder coating has special decorative effects of luxury appearance, which can help to cover up the defects of the substrate. It is widely used in the coating for various top grade metallic appliances.
Product Series
Products with various appearance like sand vein, hammer vein, silk vein, marble vein and metallic vein are available. Products of different gloss can be provided according to the customers’ to the demand.
Physical properties of the powder
Density(g/cm3,25℃):1.2-1.8
Granularity distribution:100%below 100μm(depending on the demand of art effects. It can be adapted to the specific demand of coating.)
Curing Condition
Depending on the types of different products. For detailed information, plese check the instruction book attached to our products.
Average coating rate
7-10㎡/kg, film thickness:80μm (calculated according to 100% consuming of powder coating)
Coating performance
Testing items | Standards and methods | Inspecting index |
Impact strength | GB/T 1732-1993 | 30-50kg.cm
|
ERICHSEN TEST | GB 9753-1988 | 6mm
|
Adhesion(CHECKED TEST) | GB/T 9286-1998 | Grade0 |
Bending resistance | GB 6742-1986 | 3mm
|
Pencil hardness | GB/T 6739-1996 | F-H |
Salt mist resistance | GB 1771-1991 | >500h |
Heat & moisr resistance | GB 1740-1989 | >1000h |
Notations | ⒈The tests above used the cold rolling steel plate of 0.8mm thick with preceding standard treatment. The thickness of the coaring layer is 60-80μm | |
2. The above property index may slightly vary with the variation of the product types and artistic effects. |