Epoxy /polyester powder coatings

General introduction
This type of powder coating is prepared from the epoxy and polyester resin . It has the merits of the two coatings, which makes the filmspreapared from this type of coating more decorative and gives it good mechanical properties and anti-corrosive properly . It is widely applied in the coating for indoor metallic appliances.
Product Series
Standard and low temperature solidification type powder coating can be provided. Products of different gloss are available , namely, high gloss (above 80%), semi gloss(50-80%), flat gloss(20-50%) and no gloss(below 20%). (The gloss can be adjusted according to the customers’ to the demand.)
Physical properties of the powder 
Density(g/cm3,25℃):1.4-1.7
Granularity distribution:100%below 100μm(it can be adapted to the customers’ demand)
Curing Condition
Standard type 180℃(workpiece temperature), 15minutes low temp curing type 160℃(workpiece temperature), 15minutes
Average coating rate
9-12㎡/kg, film thickness:60μm (calculated according to 100% consuming of powder coating)
Coating performance